%% This file polexprsturm.tex is part of the polexpr package (0.8.5, 2021/11/30)
%% Sturm Algorithm (polexpr 0.4)
%% 0.5 uses primitive polynomials for faster evaluations afterwards
%% 0.6 corrects misuse of \@ifstar! (mumble). \PolToSturm* was broken.
%% 0.6's \PolToSturm* defines both normalized and unnormalized, the
%%       unnormalized using two underscores, so both are available
%%       Sole difference is that \PolToSturm* also declares them as 
%%       user polynomials, whereas the non-starred only keeps the macros
%%       holding the coefficients in memory
%% 0.6 fixes the case of a constant polynomial P which caused division
%%     by zero error from P'.
%% 0.8 - fixes 0.7.5 failure to have updated to xint 1.4 format the defined
%%     \xintexpr variables holding the localization intervals extremities
%%     - also, it uses the prem() in computing the Sturm chain, for a 3X
%%     speed gain in the case of the "perturbed" first Wilkinson example
%%
\newcount\POL@count
\newif\ifPOL@tosturm@makefirstprimitive\POL@tosturm@makefirstprimitivetrue
\newif\ifPOL@isolz@nextwillneedrefine
%%
\def\PolToSturm{\POL@ifstar{\PolToSturm@@}{\PolToSturm@}}%
\def\POL@aux@toint#1{\xintREZ{\xintNum{#1}}}% for polynomials with int. coeffs!
%% Attention that some macros rely upon this one setting \POL@sturmname
%% and \POL@sturm@N as it does
\def\PolToSturm@#1#2{%
  \edef\POL@sturmname{#2}%
  % 0.6 uses 2 underscores (one before index, one after) to keep in memory
  % the unnormalized chain
  % This supposes #1 to be a genuine polynomial, not only a name with
  % a \POLuserpol@#1 macro
  \POL@let{\POL@sturmname _0_}{#1}%
  \ifnum\PolDegree{#1}=\z@
     \def\POL@sturm@N{0}%
     \POL@count\z@
     % if I applied the same as for positive degree, I should make it -1
     % if constant is negative. I also don't worry if polynomial is zero.
     \XINT_global\@namedef{POLuserpol@\POL@sturmname _0}{0.\empty{1/1[0]}}%
  \else
     \ifPOL@tosturm@makefirstprimitive\POL@makeprimitive{\POL@sturmname _0_}\fi
     \POL@tosturm@dosturm
  \fi
  \expandafter
  \let\csname PolSturmChainLength_\POL@sturmname\endcsname\POL@sturm@N
  % declare the normalized ones as full-fledged polynomials
  % \POL@count\z@
  \xintloop
    \POL@newpol{\POL@sturmname _\the\POL@count}%
  \unless\ifnum\POL@sturm@N=\POL@count
    \advance\POL@count\@ne
  \repeat
}%
\def\PolToSturm@@#1#2{\PolToSturm@{#1}{#2}\POL@tosturm@declareunnormalized}%
\def\POL@tosturm@declareunnormalized{%
  % optionally declare also the unnormalized ones
  \POL@count\z@
  \xintloop
      \POL@newpol{\POL@sturmname _\the\POL@count _}%
  \unless\ifnum\POL@sturm@N=\POL@count
      \advance\POL@count\@ne
  \repeat
}%
\def\POL@tosturm@dosturm{%
  \POL@Diff@@one{\POL@sturmname _0_}{\POL@sturmname _1_}%
  % re-utiliser \POL@varcoeffs directement?
  \POL@makeprimitive{\POL@sturmname _1_}% does not do \POL@newpol
  \POL@count\@ne
  \xintloop
  % prior to 0.8, code was using here \POL@divide
    \POL@getprem{\POL@sturmname _\the\numexpr\POL@count-\@ne\relax _}%
                {\POL@sturmname _\the\POL@count _}%
    \expandafter\POL@split\POL@R;\POL@degR\POL@polR
  \unless\ifnum\POL@degR=\m@ne
    \advance\POL@count\@ne
    \XINT_global\expandafter\let
    \csname POLuserpol@\POL@sturmname _\the\POL@count _\endcsname\POL@R
    \edef\POL@makeprim@icontent{-\POL@icontent\POL@polR}%
    % this avoids the \POL@newpol from \PolMapCoeffs
    \POL@mapcoeffs\POL@makeprim@macro{\POL@sturmname _\the\POL@count _}%
  \repeat
  \edef\POL@sturm@N{\the\POL@count}%
  % normalize (now always done even by starred variant)
  \ifnum\PolDegree{\POL@sturmname _\POL@sturm@N _}>\z@
    % \POL@count\POL@sturm@N\relax
    \xintloop
      \advance\POL@count\m@ne
      \POL@divide{\POL@sturmname _\the\POL@count _}%
                 {\POL@sturmname _\POL@sturm@N _}%
      \XINT_global\expandafter
      \let\csname POLuserpol@\POL@sturmname _\the\POL@count\endcsname\POL@Q
      % quotient actually belongs to Z[X] and is primitive
      \POL@mapcoeffs\POL@aux@toint{\POL@sturmname _\the\POL@count}%    
    \ifnum\POL@count>\z@
    \repeat
    \XINT_global\@namedef{POLuserpol@\POL@sturmname _\POL@sturm@N}{0.\empty{1/1[0]}}%
  \else % they are already normalized
    \advance\POL@count\@ne % attention to include last one also
    \xintloop
      \advance\POL@count\m@ne
      \XINT_global\expandafter\let
       \csname POLuserpol@\POL@sturmname _\the\POL@count\expandafter\endcsname
       \csname POLuserpol@\POL@sturmname _\the\POL@count _\endcsname
    \ifnum\POL@count>\z@
    \repeat
  \fi
  % Back to \PolToSturm@, \POL@count holds 0
}%
\def\PolSturmChainLength#1{%
    \romannumeral`&&@\csname PolSturmChainLength_#1\endcsname
}%
\def\PolSetToSturmChainSignChangesAt{%
  \POL@chkopt\POL@oPolSetToSturmChainSignChangesAt[\global]%
}%
\def\POL@oPolSetToSturmChainSignChangesAt[#1]#2#3#4{%
  \edef\POL@sturmchain@X{\xintREZ{#4}}%
  \edef\POL@sturmname{#3}%
  \edef\POL@sturmlength{\PolSturmChainLength{\POL@sturmname}}%
  \POL@sturmchain@getSV@at\POL@sturmchain@X
  #1\let#2\POL@sturmchain@SV
}%
\def\POL@sturmchain@getSV@at#1{% ATTENTION USES \POL@count
  \def\POL@sturmchain@SV{0}%
  \edef\POL@sturmchain@sign{\xintiiSgn{\POL@eval{\POL@sturmname _0}{#1}}}%
  \let\POL@isolz@lastsign\POL@sturmchain@sign
  \POL@count \z@
  \ifnum\POL@isolz@lastsign=\z@
    \edef\POL@isolz@lastsign
        {\xintiiSgn{\POL@eval{\POL@sturmname _1}{#1}}}%
    \POL@count \@ne
  \fi
  \xintloop
  \unless\ifnum\POL@sturmlength=\POL@count
  \advance\POL@count \@ne
    \edef\POL@isolz@newsign
      {\xintiiSgn{\POL@eval{\POL@sturmname _\the\POL@count}{#1}}}%
    \ifnum\POL@isolz@newsign=\numexpr-\POL@isolz@lastsign\relax
      \edef\POL@sturmchain@SV{\the\numexpr\POL@sturmchain@SV+\@ne}%
      \let\POL@isolz@lastsign=\POL@isolz@newsign
    \fi
  \repeat
}%
\def\PolSetToNbOfZerosWithin{%
  \POL@chkopt\POL@oPolSetToNbOfZerosWithin[\global]%
}%
\def\POL@oPolSetToNbOfZerosWithin[#1]#2#3#4#5{%
  \edef\POL@tmpA{\xintREZ{#4}}%
  \edef\POL@tmpB{\xintREZ{#5}}%
  \edef\POL@sturmname{#3}%
  \edef\POL@sturmlength{\PolSturmChainLength{\POL@sturmname}}%
  \POL@sturmchain@getSV@at\POL@tmpA
  \let\POL@SVA\POL@sturmchain@SV
  \POL@sturmchain@getSV@at\POL@tmpB
  \let\POL@SVB\POL@sturmchain@SV
  \ifnum\POL@SVA<\POL@SVB\space
    #1\edef#2{\the\numexpr\POL@SVB-\POL@SVA}%
  \else
    #1\edef#2{\the\numexpr\POL@SVA-\POL@SVB}%
  \fi
}%
% 0.6 added starred variant to count multiplicities
% 0.7 added double starred variant to locate all rational roots
\def\PolSturmIsolateZeros{\POL@ifstar
      {\PolSturmIsolateZerosAndGetMultiplicities}%
      {\PolSturmIsolateZeros@}%
}%
\def\PolSturmIsolateZerosAndGetMultiplicities{\POL@ifstar
      {\PolSturmIsolateZerosGetMultiplicitiesAndRationalRoots}%
      {\PolSturmIsolateZerosAndGetMultiplicities@}%
}%
% on aurait besoin de ça dans xint, mais il aurait un \xintRaw{#1} alors
\def\POL@xintfrac@getNDE #1%
   {\expandafter\POL@xintfrac@getNDE@i\romannumeral`&&@#1}%
\def\POL@xintfrac@getNDE@i #1/#2[#3]#4#5#6{\def#4{#1}\def#5{#2}\def#6{#3}}%
%
\def\PolSturmIsolateZerosGetMultiplicitiesAndRationalRoots{%
  \POL@chkopt\POL@oPolSturmIsolateZerosGetMultiplicitiesAndRationalRoots[\empty]%
}%
\def\POL@oPolSturmIsolateZerosGetMultiplicitiesAndRationalRoots[#1]#2{%
  \PolSturmIsolateZerosAndFindRationalRoots[#1]{#2}%
  \ifnum\POL@isolz@NbOfRoots>\z@
     % get multiplicities of irrational (real) roots, if any
     \ifnum\POL@findrat@nbofirrroots>\z@
        \POL@findrat@getirrmult
     \fi
     \POL@isolzmult@defvar@M
  \fi
}%
% added at 0.7
\def\PolSturmIsolateZerosAndFindRationalRoots{%
  \POL@chkopt\POL@oPolSturmIsolateZerosAndFindRationalRoots[\empty]%
}%
\def\POL@oPolSturmIsolateZerosAndFindRationalRoots[#1]#2{%
  % #1 optional E such that roots are searched in -10^E < x < 10^E
  % both -10^E and +10^E must not be roots!
  % #2 name of Sturm chain (already pre-computed)
  \edef\POL@sturmname{#2}%
  \edef\POL@sturm@N{\@nameuse{PolSturmChainLength_\POL@sturmname}}%
  % isolate the roots (detects case of constant polynomial)
  \PolSturmIsolateZeros@{\POL@sturmname}%
  % 0.8.4 fix: these declarations were formerly not executed in absence of roots!
     % on ne va pas utiliser de Horner, mais des divisions par X - x, et ces
     % choses vont évoluer, ainsi que le coefficient dominant entier
     % (pour \POL@divide entre autres if faut des noms de user pol)
     \XINT_global
     \expandafter\let
         \csname POLuserpol@\POL@sturmname\POL@sqfnorr\expandafter\endcsname
         \csname POLuserpol@\POL@sturmname _0\endcsname
     \XINT_global
     \expandafter\let
         \csname POLuserpol@\POL@sturmname\POL@norr\expandafter\endcsname
         \csname POLuserpol@\POL@sturmname _0_\endcsname
  \ifnum\POL@isolz@NbOfRoots=\z@
     % no real roots, define empty arrays nevertheless
     \begingroup\globaldefs\@ne
     \expandafter\xintAssignArray\expandafter\to\csname POL_ZM\POL@sturmname*\endcsname
     \expandafter\xintAssignArray\expandafter\to\csname POL_RI\POL@sturmname*\endcsname
     \endgroup
  \else
     % all we currently know is that multiplicities are at least one
     \begingroup\globaldefs\@ne
     \expandafter\POL@initarray\csname POL_ZM\POL@sturmname*\endcsname{1}%
     \endgroup
     % attention formé avec\xintREZ d'où le \xintAbs pas \xintiiAbs
     % D and its exponent E will get updated along the way
     \edef\POL@findrat@D{\xintAbs{\PolLeadingCoeff{\POL@sturmname _0}}}%
     \POL@xintfrac@getNDE\POL@findrat@D\POL@findrat@Dint\POL@_\POL@findrat@Dexp
     \xintiiifOne{\POL@findrat@Dint}
        {\let\POL@findrat@E\POL@findrat@Dexp} % aussi ok pour 1[0]
        {\edef\POL@findrat@E{\the\numexpr\xintLen{\POL@findrat@Dint}%
                                                 +\POL@findrat@Dexp}}%
% ATTENTION QUE LA CONVENTION DE SIGNE POUR \POL@findrat@E EST OPPOSÉE À CELLE
% POUR LE CODE PLUS ANCIEN FAISANT "REFINE"
     \POL@initarray\POL@IfMultIsKnown\xint_secondoftwo
     \let\POL@findrat@nbofirrroots\POL@isolz@NbOfRoots
     % find all rational roots, and their multiplicities,
     % factor them out in passing from original (Sturm root) polynomial
     \ifnum\POL@findrat@E<7 %
         \def\POL@findrat@index{1}%
         \POL@findrat@loop@secondpass@direct
     \else
     % we do a first pass scanning for "small" roots p/q (i.e. q < 1000)
         \def\POL@findrat@index{1}%
         \POL@findrat@loop@firstpass
     % and now we do the final pass finding them all
         \def\POL@findrat@index{1}%
         \POL@findrat@loop@secondpass
     \fi
     % declare the array holding the interval indices for the rational roots
     \expandafter\POL@findrat@doRRarray\csname POL_RI\POL@sturmname*\endcsname
  \fi
     % declare the new polynomials (also if no real roots exist)
     \POL@newpol{\POL@sturmname\POL@sqfnorr}%  without multiplicities
     \POL@newpol{\POL@sturmname\POL@norr}% with multiplicities
}%
\def\POL@findrat@doRRarray#1{%
  % il faudrait un \xintAssignArray* qui fasse même expansion que \xintFor*
  \edef\POL@temp{%
    \xintiloop[1+1]
    \romannumeral0\csname POL_ZK\POL@sturmname*\xintiloopindex\endcsname
    \xintbracediloopindex % I should have named it \xintiloopbracedindex...
    {}%
    \ifnum\xintiloopindex<\POL@isolz@NbOfRoots\space
    \repeat }%
  \begingroup\globaldefs\@ne
  % attention de ne surtout pas faire un \expandafter ici, car en cas d'un
  % seul item, \xintAssignArray l'unbraces...
  \xintAssignArray\POL@temp\to#1%
  \endgroup
}%
\def\POL@findrat@loop@firstpass{%
  \PolSturmIfZeroExactlyKnown{\POL@sturmname}{\POL@findrat@index}%
     \POL@findrat@loop@decimal% get its multiplicity
     \POL@findrat@loop@aa     % refine interval and check
  \edef\POL@findrat@index{\the\numexpr\POL@findrat@index+\@ne}%
  \ifnum\POL@findrat@index>\POL@isolz@NbOfRoots
  \else
    \expandafter\POL@findrat@loop@firstpass
  \fi
}%
\def\POL@findrat@loop@aa{%
  % we do a first pass to identify roots with denominators < 1000
  \PolEnsureIntervalLength{\POL@sturmname}{\POL@findrat@index}{-6}%
  % attention that perhaps now the root is known!
  \PolSturmIfZeroExactlyKnown{\POL@sturmname}{\POL@findrat@index}%
      \POL@findrat@loop@decimal
      \POL@findrat@loop@a
}%
\def\POL@findrat@loop@decimal{% we have an already found decimal root
  % we do not go via @storeit, as it is already stored
  % j'ai beaucoup hésité néanmoins, car je pourrais faire \xintIrr ici,
  % mais attention aussi à l'interaction avec le \PolDecToString. Les racines
  % trouvées directement (qui peuvent être des nombres décimaux) sont elles
  % stockées comme fraction irréductibles (modulo action additionnelle de 
  % \PolDecToString). 
  \POL@xintfrac@getNDE
    {\xintIrr{\POL@xintexprGetVar{\POL@sturmname L_\POL@findrat@index}}[0]}%
    \POL@findrat@xN\POL@findrat@xD\POl@_
  % we can't move this to updatequotients because other branch will
  % need to do the division first anyhow
  \edef\POLuserpol@_findrat@oneterm{1.\noexpand\empty
        {\xintiiOpp\POL@findrat@xN/1[0]}{\POL@findrat@xD/1[0]}}%
  \POL@divide{\POL@sturmname\POL@sqfnorr}{_findrat@oneterm}% the one without mult.
  %\expandafter\POL@split\POL@R;\POL@degR\POL@polR
  \POL@findrat@loop@updatequotients
  \POL@findrat@loop@getmultiplicity
}%
% lacking from xint 1.3c, but \xintSgn has overhead, so we define ii version
\def\xintiiifNeg{\romannumeral0\xintiiifneg }%
\def\xintiiifneg #1%
{%
    \ifcase \xintiiSgn{#1}
               \expandafter\xint_stop_atsecondoftwo
            \or\expandafter\xint_stop_atsecondoftwo
          \else\expandafter\xint_stop_atfirstoftwo
    \fi
}%
\def\POL@findrat@getE #1/1[#2]{#2}% /1 as it should be there.
% so an error will arise if not but cf \POL@refine@getE where I did not put it
\def\POL@findrat@loop@a{%
  % attention that the width may have been already smaller than 10^{-6}
  \POL@get@IsoLeft@rawin
  \POL@get@IsoRight@rawin
  \edef\POL@findrat@localW
      {\the\numexpr-\expandafter\POL@findrat@getE
  % do I really need the \xintREZ?
       \romannumeral0\xintrez
         {\xintSub{\POL@IsoRight@rawin}{\POL@IsoLeft@rawin}}%
      }% at least 6, maybe larger
  \expandafter\POL@get@Int@aux
              \POL@IsoLeft@rawin\POL@IsoLeft@Int{-\POL@findrat@localW}%
  \expandafter\POL@get@Int@aux
              \POL@IsoRight@rawin\POL@IsoRight@Int{-\POL@findrat@localW}%
  % in case of odd, some waste here
  \edef\POL@findrat@halflocalW{\the\numexpr(\POL@findrat@localW+1)/2-1}%
  % Legendre Theorem will be used now but we separate a branch where
  % everything can be done with \numexpr
  \ifnum\POL@findrat@localW>9 %
    % not implemented yet by lazyness!
    % this root will be handled in second pass only
  \else
    \POL@findrat@gcdloop
  \fi
}%
\def\POL@findrat@gcdloop{%
  % we must be careful with sign
  % but we are certain no extremity is a root
  \let\POL@findrat@ifnegative\xint_secondoftwo
  \xintiiifSgn\POL@IsoLeft@Int
    \POL@findrat@gcdloop@n
    \POL@error@thisisimpossible
    \POL@findrat@gcdloop@p
}%
\def\POL@findrat@gcdloop@n{%
  \let\POL@findrat@ifnegative\xint_firstoftwo
  \let\POL@temp\POL@IsoRight@Int
  \edef\POL@IsoRight@Int{\xintiiOpp{\POL@IsoLeft@Int}}%
  \edef\POL@IsoLeft@Int{\xintiiOpp{\POL@temp}}%
  \POL@findrat@gcdloop@p
}%
\def\POL@findrat@gcdloop@p{%
  \edef\POL@findrat@gcdloop@Ap{\xintDec{\xintDouble\POL@IsoRight@Int}}%
  \edef\POL@findrat@gcdloop@A
  % at most 2e9: this is acceptable to \numexpr
      {2\romannumeral\xintreplicate\POL@findrat@localW{0}}%
  \xintAssign
    \xintiiDivision\POL@findrat@gcdloop@Ap\POL@findrat@gcdloop@A
  \to\POL@findrat@gcdloop@B\POL@findrat@gcdloop@An
  % on fait de la tambouille pour n'utiliser que \numexpr par la suite
  % le reste @An est < 2.10^9 au pire donc ok pour \numexpr
  % we will drop integral part in our updating P
  \let\POL@findrat@gcdloop@Binitial\POL@findrat@gcdloop@B
  \def\POL@findrat@gcdloop@B{0}%  do as if B1 = 0
  \def\POL@findrat@gcdloop@Pp{1}% P0
  \def\POL@findrat@gcdloop@P{0}%  P1
  \def\POL@findrat@gcdloop@Qp{0}% Q0
  \def\POL@findrat@gcdloop@Q{1}%  Q1
  % A2=An can not be zero, as Ap (=A0) is odd and A (=A1=200...000) is even
  % first Binitial + P1/Q1 ( = Binitial) can not be root
  \let\POL@findrat@gcdloop@Ap\POL@findrat@gcdloop@A % A1
  \let\POL@findrat@gcdloop@A\POL@findrat@gcdloop@An % A2
  \def\next{\POL@findrat@gcdloop@update}%
  \def\POL@findrat@gcdloop@done{0}%
  \POL@findrat@gcdloop@body
}%
\def\POL@findrat@gcdloop@body{%
    % annoying that \numexpr has no divmod... use counts? but groups annoying
    \edef\POL@findrat@gcdloop@B
        {\the\numexpr(\POL@findrat@gcdloop@Ap+\POL@findrat@gcdloop@A/2)/%
                      \POL@findrat@gcdloop@A - \@ne}%
    \edef\POL@findrat@gcdloop@An
        {\the\numexpr\POL@findrat@gcdloop@Ap-%
                     \POL@findrat@gcdloop@B*\POL@findrat@gcdloop@A}%
    \edef\POL@findrat@gcdloop@Pn
        {\the\numexpr\POL@findrat@gcdloop@Pp+%
                     \POL@findrat@gcdloop@B*\POL@findrat@gcdloop@P}%
    \edef\POL@findrat@gcdloop@Qn
        {\the\numexpr\POL@findrat@gcdloop@Qp+%
                     \POL@findrat@gcdloop@B*\POL@findrat@gcdloop@Q}%
    \ifnum\expandafter\xintLength\expandafter{\POL@findrat@gcdloop@Qn}%
          >\POL@findrat@halflocalW\space
       \let\next\empty % no solution was found
    \else
    % with these conditions on denom, only candidates are by Legendre
    % theorem among the convergents as computed here
       \ifnum\POL@findrat@gcdloop@Qn>\POL@findrat@gcdloop@An\space
         % means that P/Q is in interval and is thus a candidate
         % it is automatically irreducible
         \edef\POL@findrat@x{\xintiiAdd
           {\xintiiMul{\POL@findrat@gcdloop@Qn}{\POL@findrat@gcdloop@Binitial}}%
           {\POL@findrat@gcdloop@Pn}/\POL@findrat@gcdloop@Qn[0]}%
         \POL@findrat@gcdloop@testit
         \if1\POL@findrat@gcdloop@done
            \let\next\empty % a solution was found
         \fi
       \fi
    \fi
    \next
}%
\def\POL@findrat@gcdloop@update{%
    \ifnum\POL@findrat@gcdloop@An>\z@
        \let\POL@findrat@gcdloop@Ap\POL@findrat@gcdloop@A
        \let\POL@findrat@gcdloop@A\POL@findrat@gcdloop@An
        \let\POL@findrat@gcdloop@Pp\POL@findrat@gcdloop@P
        \let\POL@findrat@gcdloop@P\POL@findrat@gcdloop@Pn
        \let\POL@findrat@gcdloop@Qp\POL@findrat@gcdloop@Q
        \let\POL@findrat@gcdloop@Q\POL@findrat@gcdloop@Qn
    \expandafter\POL@findrat@gcdloop@body
    \fi
}%
\def\POL@findrat@gcdloop@testit{%
  % zero should never occur here
  \POL@findrat@ifnegative{\edef\POL@findrat@x{-\POL@findrat@x}}{}%
  \POL@xintfrac@getNDE\POL@findrat@x\POL@findrat@xN\POL@findrat@xD\POL@_
  \edef\POLuserpol@_findrat@oneterm{1.\noexpand\empty
      {\xintiiOpp{\POL@findrat@xN}/1[0]}{\POL@findrat@xD/1[0]}}%
  \POL@divide{\POL@sturmname\POL@sqfnorr}{_findrat@oneterm}% the one without mult.
  \expandafter\POL@split\POL@R;\POL@degR\POL@polR
  \ifnum\POL@degR=\m@ne % found a root
    \POL@findrat@loop@storeit
    \POL@findrat@loop@updatequotients
    \POL@findrat@loop@getmultiplicity % will continue updating the mult. one
    \def\POL@findrat@gcdloop@done{1}%
  \fi
}%            
% This is second phase
\def\POL@findrat@loop@secondpass{%
  \PolSturmIfZeroExactlyKnown{\POL@sturmname}{\POL@findrat@index}%
     {}% nothing more to be done, already stored
     \POL@findrat@loop@bb % refine interval and check
  \edef\POL@findrat@index{\the\numexpr\POL@findrat@index+\@ne}%
  \ifnum\POL@findrat@index>\POL@isolz@NbOfRoots
  \else
     \expandafter\POL@findrat@loop@secondpass
  \fi
}%
\def\POL@findrat@loop@secondpass@direct{%
  \PolSturmIfZeroExactlyKnown{\POL@sturmname}{\POL@findrat@index}%
     \POL@findrat@loop@decimal
     \POL@findrat@loop@bb
  \edef\POL@findrat@index{\the\numexpr\POL@findrat@index+\@ne}%
  \ifnum\POL@findrat@index>\POL@isolz@NbOfRoots
  \else
     \expandafter\POL@findrat@loop@secondpass@direct
  \fi
}%
\def\POL@findrat@loop@bb{%
  \PolEnsureIntervalLength{\POL@sturmname}{\POL@findrat@index}{-\POL@findrat@E}%
  % ATTENTION THAT PERHAPS NOW THE ROOT IS KNOWN!
  \PolSturmIfZeroExactlyKnown{\POL@sturmname}{\POL@findrat@index}%
      \POL@findrat@loop@decimal
      \POL@findrat@loop@b
}%
\def\POL@findrat@loop@b{%
  \edef\POL@findrat@Lscaled{\xintMul{\POL@findrat@D}%
       {\POL@xintexprGetVar{\POL@sturmname L_\POL@findrat@index}}}%
  \edef\POL@findrat@Rscaled{\xintMul{\POL@findrat@D}%
       {\POL@xintexprGetVar{\POL@sturmname R_\POL@findrat@index}}}%
  \xintiiifNeg{\POL@findrat@Lscaled}% using ii version is an abuse
    {% negative interval (right bound possibly zero!)
     % truncate towards zero (i.e. to the right) the left bound
     \edef\POL@findrat@Num{\xintNum{\POL@findrat@Lscaled}/1[0]}%
     % interval boundaries are not root hence in case that was exact
     % this will not be found as a root; check if in interval
     \xintifLt\POL@findrat@Num\POL@findrat@Rscaled
         \POL@findrat@loop@c
         {}% iterate
    }%
    {% positive interval (left bound possibly zero!)
     % truncate towards zero (i.e. to the left) the right bound
     \edef\POL@findrat@Num{\xintNum{\POL@findrat@Rscaled}/1[0]}%
     % check if in interval
     \xintifGt\POL@findrat@Num\POL@findrat@Lscaled
         \POL@findrat@loop@c
         {}% iterate
    }%
}%
\def\POL@findrat@loop@c{%
  % safer to do the edef as \POL@findrat@x used later in storeit
  \edef\POL@findrat@x{\xintIrr{\xintDiv\POL@findrat@Num\POL@findrat@D}[0]}%
  \POL@xintfrac@getNDE\POL@findrat@x\POL@findrat@xN\POL@findrat@xD\POL@_
  \edef\POLuserpol@_findrat@oneterm{1.\noexpand\empty
      {\xintiiOpp{\POL@findrat@xN}/1[0]}{\POL@findrat@xD/1[0]}}%
  \POL@divide{\POL@sturmname\POL@sqfnorr}{_findrat@oneterm}% the one without mult.
  \expandafter\POL@split\POL@R;\POL@degR\POL@polR
  \ifnum\POL@degR=\m@ne % found a root
    \POL@findrat@loop@storeit
    \POL@findrat@loop@updatequotients
    \POL@findrat@loop@getmultiplicity % will continue updating the mult. one
  \fi
  % iterate
}%
\def\POL@findrat@loop@storeit{%
  % update storage, I can not use storeleftandright here (due to rawout etc...)
  \expandafter
  \xdef\csname POL_ZL\POL@sturmname*\POL@findrat@index\endcsname
                                     {\PolDecToString{\POL@findrat@x}}%
  \global\expandafter
  \let\csname POL_ZR\POL@sturmname*\POL@findrat@index\expandafter\endcsname
       \csname POL_ZL\POL@sturmname*\POL@findrat@index\endcsname
  \global\expandafter
  \let\csname POL_ZK\POL@sturmname*\POL@findrat@index\endcsname
        \xint_stop_atfirstoftwo
  \begingroup\xintglobaldefstrue
  % skip some overhead of \xintdefvar...
  % BUT attention to changes in xint 1.4 internal format !
    \XINT_expr_defvar_one{\POL@sturmname L_\POL@findrat@index}%
       {{\POL@findrat@x}}%
    \XINT_expr_defvar_one{\POL@sturmname R_\POL@findrat@index}%
       {{\POL@findrat@x}}%
    \XINT_expr_defvar_one{\POL@sturmname Z_\POL@findrat@index _isknown}%
       {{1}}%
  \endgroup
}%
\def\POL@findrat@loop@updatequotients{%
  % attention last division must have been one testing vanishing of\POL@sqfnorr
  \XINT_global\expandafter\let\csname POLuserpol@\POL@sturmname\POL@sqfnorr\endcsname\POL@Q
  % quotient belongs to Z[X] and is primitive
  \POL@mapcoeffs\POL@aux@toint{\POL@sturmname\POL@sqfnorr}%
  % update the one with multiplicities
  \POL@divide{\POL@sturmname\POL@norr}{_findrat@oneterm}%
  \XINT_global\expandafter\let\csname POLuserpol@\POL@sturmname\POL@norr\endcsname\POL@Q
  \POL@mapcoeffs\POL@aux@toint{\POL@sturmname\POL@norr}
  % updating of \POL@findrat@D at end of execution of getmultiplicity
}%
\def\POL@findrat@loop@getmultiplicity{%
  % the one without multiplicity must not be divided again!
  % check if we have remaining multiplicity
  \POL@divide{\POL@sturmname\POL@norr}{_findrat@oneterm}%
  \expandafter\POL@split\POL@R;\POL@degR\POL@polR
  \ifnum\POL@degR=\m@ne % yes
    \XINT_global\expandafter\let\csname POLuserpol@\POL@sturmname\POL@norr\endcsname\POL@Q
    \POL@mapcoeffs\POL@aux@toint{\POL@sturmname\POL@norr}%
    \expandafter
    \xdef
    \csname POL_ZM\POL@sturmname*\POL@findrat@index\endcsname
      {\the\numexpr
       \csname POL_ZM\POL@sturmname*\POL@findrat@index\endcsname+\@ne}%
    \expandafter\POL@findrat@loop@getmultiplicity
  \else 
  % done with multiplicity for this rational root, update stuff
    \edef\POL@findrat@nbofirrroots
         {\the\numexpr\POL@findrat@nbofirrroots-\@ne}%
    \@namedef{POL@IfMultIsKnown\POL@findrat@index}{\xint_firstoftwo}%
    \edef\POL@findrat@D{\xintAbs{\PolLeadingCoeff{\POL@sturmname\POL@sqfnorr}}}%
    \POL@xintfrac@getNDE\POL@findrat@D\POL@findrat@Dint\POL@_\POL@findrat@Dexp
    \xintiiifOne{\POL@findrat@Dint}
        {\let\POL@findrat@E\POL@findrat@Dexp} % aussi ok pour 1[0]
        {\edef\POL@findrat@E{\the\numexpr\xintLen{\POL@findrat@Dint}%
                                                 +\POL@findrat@Dexp}}%
  \fi
}%
\def\POL@findrat@getirrmult{%
  % first get the GCD of remaining pol with its derivative
  \POL@divide{\POL@sturmname\POL@norr}{\POL@sturmname\POL@sqfnorr}%
  \expandafter\let
    % attention au _ (cf. grosse astuce pour \POL@isolzmult@loop)
    \csname POLuserpol@@_1\POL@sturmname _\endcsname\POL@Q
  \ifnum\PolDegree{@_1\POL@sturmname _}>\z@
    % il reste des multiplicités (mais peut-être pour des racines complexes)
    % (ou pour des racines en-dehors de l'intervalle optionnel)
    % attention recyclage ici de \POL@isolzmult@loop qui dépend de
    % la  grosse astuce avec \@gobble
    \POL@makeprimitive{@_1\POL@sturmname _}%
    \let\POL@originalsturmname\POL@sturmname
    % trick to get isolzmult@loop to define @@lastGCD to @_1sturmname_
    % because it will do \POL@sturmname _\POL@sturm@N _
    \edef\POL@sturmname{@_1\POL@sturmname}%
    \let\POL@sturm@N\@gobble% !
    \let\POL@isolz@NbOfRoots@with_unknown_mult\POL@findrat@nbofirrroots
    \POL@tosturm@makefirstprimitivefalse
\expanded{\unexpanded{%
 \unless\ifxintveryverbose\xintverbosefalse\polnewpolverbosefalse\fi
    \POL@isolzmult@loop
}\ifxintverbose\noexpand\xintverbosetrue\fi
 \ifpolnewpolverbose\noexpand\polnewpolverbosetrue\fi}%
    \POL@tosturm@makefirstprimitivetrue
    \let\POL@sturmname\POL@originalsturmname
  \fi
}%
\def\PolSturmIsolateZerosAndGetMultiplicities@{%
  \POL@chkopt\POL@oPolSturmIsolateZerosAndGetMultiplicities@[\empty]%
}%
\def\POL@oPolSturmIsolateZerosAndGetMultiplicities@[#1]#2{%
  % #1 optional E such that roots are searched in -10^E < x < 10^E
  % both -10^E and +10^E must not be roots!
  % #2 name of Sturm chain (already pre-computed)
  \edef\POL@sturmname{#2}%
  \edef\POL@sturm@N{\@nameuse{PolSturmChainLength_\POL@sturmname}}%
  % isolate the roots (detects case of constant polynomial)
  \PolSturmIsolateZeros@{\POL@sturmname}%
  \ifnum\POL@isolz@NbOfRoots=\z@
  % no roots, define empty array nevertheless
     \begingroup\globaldefs\@ne
     \expandafter\xintAssignArray\expandafter\to\csname POL_ZM\POL@sturmname*\endcsname
     \endgroup
  \else
     % all we currently know is that multiplicities are at least one
     \begingroup\globaldefs\@ne
     \expandafter\POL@initarray\csname POL_ZM\POL@sturmname*\endcsname{1}%
     \endgroup
     % check if GCD had positive degree (hence some roots, maybe complex, have
     % multiplicity)
     \ifnum\PolDegree{\POL@sturmname _\POL@sturm@N _}>\z@
         % scratch array of flags to signal known multiplicities
         \POL@initarray\POL@IfMultIsKnown\xint_secondoftwo
         % this count has utility for the case there are other roots
         % either complex or outside interval (in case of optional argument)
         \let\POL@isolz@NbOfRoots@with_unknown_mult\POL@isolz@NbOfRoots
         % store Sturm chain name, it is needed and altered in isolzmult@loop
         \let\POL@originalsturmname\POL@sturmname
         \POL@tosturm@makefirstprimitivefalse
\expanded{\unexpanded{%
 \unless\ifxintveryverbose\xintverbosefalse\polnewpolverbosefalse\fi
    \POL@isolzmult@loop
}\ifxintverbose\noexpand\xintverbosetrue\fi
 \ifpolnewpolverbose\noexpand\polnewpolverbosetrue\fi}%
         \POL@tosturm@makefirstprimitivetrue
         \let\POL@sturmname\POL@originalsturmname
     \fi
     \POL@isolzmult@defvar@M
  \fi
}%
\def\POL@isolzmult@defvar@M{%
  % Attention that is used not only in ...GetMultiplicities@ but also
  % in FindRationalRoots
  \begingroup\xintglobaldefstrue
  % added at 0.7
  \let\x\POL@isolz@NbOfRoots
    \xintloop
    % skip some overhead of \xintdefvar...
    % ATTENTION to xint 1.4 internal changes !
      \XINT_expr_defvar_one{\POL@sturmname M_\x}%
         {{\csname POL_ZM\POL@sturmname*\x\endcsname}}%
    \edef\x{\the\numexpr\x-\@ne}%
    \ifnum\x>\z@
    \repeat
  \endgroup
}%
\def\POL@isolzmult@loop{%
   % we are here only if last iteration gave a new GCD still of degree > 0
   % \POL@sturm@N is the one from last iteration
   % Attention to not use \POL@sturmname directly in first arg. of \PolToSturm
   % Attention that we need for the case of known roots also to have the last
   % GCD (with its multiplicities) known as a genuine polynomial
   % - because of usage of \POL@eval in @isknown branch
   % - because \PolToSturm@ does a \POL@let which would be anomalous
   %   if the extended structure is not existing
   \edef\POL@isolzmult@lastGCD{\POL@sturmname _\POL@sturm@N _}%
   \edef\POL@isolzmult@newsturmname{@_1\POL@sturmname}%
   \POL@newpol{\POL@isolzmult@lastGCD}%
   \PolToSturm@{\POL@isolzmult@lastGCD}{\POL@isolzmult@newsturmname}%
   % now both \POL@sturmname and \POL@sturm@N have changed
   \edef\POL@isolzmult@newGCDdegree{\PolDegree{\POL@sturmname _\POL@sturm@N _}}%
   \let\POL@isolzmult@index\POL@isolz@NbOfRoots
   \xintloop
     % ATTENTION that this executes macros which also modifies \POL@sturmname!
     % (but not \POL@sturm@N)
     \POL@isolzmult@doone
     \edef\POL@isolzmult@index{\the\numexpr\POL@isolzmult@index-\@ne}%
   \if1\ifnum\POL@isolz@NbOfRoots@with_unknown_mult=\z@ 0\fi
       \ifnum\POL@isolzmult@index=\z@ 0\fi 1%
   \repeat
   \let\POL@sturmname\POL@isolzmult@newsturmname
   \if1\ifnum\POL@isolz@NbOfRoots@with_unknown_mult=\z@ 0\fi
       % (if new GCD is constant, time to abort)
       \ifnum\POL@isolzmult@newGCDdegree=\z@ 0\fi 1%
     \expandafter\POL@isolzmult@loop
   \fi
}%
\def\POL@isolzmult@doone{%
   \csname POL@IfMultIsKnown\POL@isolzmult@index\endcsname
     {}% nothing to do
     {\POL@SturmIfZeroExactlyKnown{\POL@originalsturmname}%
                                  {\POL@isolzmult@index}%
           \POL@isolzmult@loop@isknown
           \POL@isolzmult@loop@isnotknown
      \POL@isolzmult@loop@sharedbody
     }%
}%
\def\POL@isolzmult@loop@isknown{%
   \xintifZero
   % attention that \POL@eval requires a declared polynomial
     {\POL@eval{\POL@isolzmult@lastGCD}%
               {\POL@xintexprGetVar{\POL@originalsturmname L_\POL@isolzmult@index}}}%
   {\let\POL@isolzmult@haszero\@ne}%
   {\let\POL@isolzmult@haszero\z@}%
}%
\def\POL@isolzmult@loop@isnotknown{%
   \edef\POL@isolzmult@loop@A 
        {\POL@xintexprGetVar{\POL@originalsturmname L_\POL@isolzmult@index}}
   \edef\POL@isolzmult@loop@B
        {\POL@xintexprGetVar{\POL@originalsturmname
            R_\POL@isolzmult@index}}
   % attention that \PolSetToNbOfZerosWithin sets \POL@sturmname to 2nd argument
   \PolSetToNbOfZerosWithin
      \POL@isolzmult@haszero  % nb of zeros A < x <= B, here 0 or 1
      \POL@isolzmult@newsturmname
      \POL@isolzmult@loop@A
      \POL@isolzmult@loop@B
}%
\def\POL@isolzmult@loop@sharedbody{%
   \ifnum\POL@isolzmult@haszero>\z@
     \expandafter
     \xdef
     \csname POL_ZM\POL@originalsturmname*\POL@isolzmult@index\endcsname
       {\the\numexpr
        \csname POL_ZM\POL@originalsturmname
                            *\POL@isolzmult@index\endcsname+\@ne}%
   \else
     % multiplicity now known, no need to check this index in future
     \@namedef{POL@IfMultIsKnown\POL@isolzmult@index}{\xint_firstoftwo}%
     \edef\POL@isolz@NbOfRoots@with_unknown_mult
       {\the\numexpr\POL@isolz@NbOfRoots@with_unknown_mult-\@ne}%
   \fi
}%
\def\PolSturmIsolateZeros@{%
  \POL@chkopt\POL@oPolSturmIsolateZeros@[\empty]%
}%
\def\POL@oPolSturmIsolateZeros@[#1]#2{%
  % #1 optional E such that roots are searched in -10^E < x < 10^E
  % both -10^E and +10^E must not be roots!
  % #2 name of Sturm chain (already pre-computed from a given polynomial)
  % For reasons I have forgotten (no time now) this code **must** be used
  % with a *normalized* Sturm chain.
  \edef\POL@sturmname{#2}%
  \edef\POL@sturmlength{\PolSturmChainLength{#2}}%
  % attention to constant polynomial, we must redefine the arrays then
  \ifnum\POL@sturmlength>\z@
   \ifx\empty#1\relax
    \POL@isolz@getsignchanges@plusinf
    \POL@isolz@getsignchanges@minusinf
   \else
    \edef\POL@isolz@E{\the\numexpr\xint_zapspaces #1 \xint_gobble_i\relax}%
    \POL@sturmchain@getSV@at{1[\POL@isolz@E]}%
    \let\POL@isolz@plusinf@SV  \POL@sturmchain@SV
    \let\POL@isolz@plusinf@sign\POL@sturmchain@sign
    \POL@sturmchain@getSV@at{-1[\POL@isolz@E]}%
    \let\POL@isolz@minusinf@SV  \POL@sturmchain@SV
    \let\POL@isolz@minusinf@sign\POL@sturmchain@sign
    \ifnum\POL@isolz@plusinf@sign=\z@
        \PackageError{polexpr}%
{The polynomial #2 vanishes at set upper bound 10^\POL@isolz@E}%
{Compile again with a bigger exponent in source. (X to abort).}%
    \fi
    \ifnum\POL@isolz@minusinf@sign=\z@
        \PackageError{polexpr}%
{The polynomial #2 vanishes at set lower bound -10^\POL@isolz@E}%
{Compile again with a bigger exponent in source. (X to abort).}%
    \fi
   \fi
   \edef\POL@isolz@NbOfRoots
      {\the\numexpr\POL@isolz@minusinf@SV-\POL@isolz@plusinf@SV}%
  \else
    % constant polynomial
   \def\POL@isolz@NbOfRoots{0}%
  \fi
  \ifnum\POL@isolz@NbOfRoots=\z@
     \begingroup\globaldefs\@ne
     \expandafter\xintAssignArray\expandafter\to\csname POL_ZL#2*\endcsname
     \expandafter\xintAssignArray\expandafter\to\csname POL_ZR#2*\endcsname
     \expandafter\xintAssignArray\expandafter\to\csname POL_ZK#2*\endcsname
     \endgroup
  \else
     \begingroup\globaldefs\@ne
     \expandafter\POL@initarray\csname POL_ZL#2*\endcsname{0}%
     \expandafter\POL@initarray\csname POL_ZR#2*\endcsname{0}%
     \expandafter\POL@initarray\csname POL_ZK#2*\endcsname
                 \xint_stop_atsecondoftwo
     \endgroup
     \ifx\empty#1\relax\expandafter\POL@isolz@getaprioribound\fi
     \expandafter\POL@isolz@main
  \fi
}%
\def\POL@initarray#1#2{%
% ATTENTION, if only one item, \xintAssignArray UNBRACES IT
% so we use an \empty trick to avoid that. Maybe considered a bug of xinttools?
  \expandafter\xintAssignArray\expandafter\empty
    \romannumeral\xintreplicate{\POL@isolz@NbOfRoots}{{#2}}\to#1%
}%
\def\POL@isolz@getsignchanges@plusinf{%
  % Count number of sign changes at plus infinity in Sturm sequence
  \def\POL@isolz@plusinf@SV{0}%
  \edef\POL@isolz@lastsign{\xintiiSgn{\PolLeadingCoeff{\POL@sturmname _0}}}%
  \let\POL@isolz@plusinf@sign\POL@isolz@lastsign
  \POL@count\@ne
  \xintloop
    \edef\POL@isolz@newsign
        {\xintiiSgn{\PolLeadingCoeff{\POL@sturmname _\the\POL@count}}}%
    \unless\ifnum\POL@isolz@newsign=\POL@isolz@lastsign
       \edef\POL@isolz@plusinf@SV{\the\numexpr\POL@isolz@plusinf@SV+\@ne}%
    \fi
    \let\POL@isolz@lastsign=\POL@isolz@newsign
  \ifnum\POL@sturmlength>\POL@count
    \advance\POL@count\@ne
  \repeat
}%
\def\POL@isolz@getsignchanges@minusinf{%
  % Count number of sign changes at minus infinity in Sturm sequence
  \def\POL@isolz@minusinf@SV{0}%
  \edef\POL@isolz@lastsign{\xintiiSgn{\PolLeadingCoeff{\POL@sturmname _0}}}%
  \ifodd\PolDegree{\POL@sturmname _0}
      \edef\POL@isolz@lastsign{\xintiiOpp{\POL@isolz@lastsign}}%
  \fi
  \let\POL@isolz@minusinf@sign\POL@isolz@lastsign
  \POL@count\@ne
  \xintloop
    \edef\POL@isolz@newsign
      {\xintiiSgn{\PolLeadingCoeff{\POL@sturmname _\the\POL@count}}}%
    \ifodd\PolDegree{\POL@sturmname _\the\POL@count}
      \edef\POL@isolz@newsign{\xintiiOpp{\POL@isolz@newsign}}%
    \fi
    \unless\ifnum\POL@isolz@newsign=\POL@isolz@lastsign
       \edef\POL@isolz@minusinf@SV{\the\numexpr\POL@isolz@minusinf@SV+\@ne}%
    \fi
    \let\POL@isolz@lastsign=\POL@isolz@newsign
  \ifnum\POL@sturmlength>\POL@count
    \advance\POL@count\@ne
  \repeat
}%
% utility macro for a priori bound on root decimal exponent, via Float Rounding
\def\POL@isolz@updateE #1e#2;%
  {\unless\ifnum#2<\POL@isolz@E\space\edef\POL@isolz@E{\the\numexpr#2+\@ne}\fi}%
\def\POL@isolz@getaprioribound{%
  \PolAssign{\POL@sturmname _0}\toarray\POL@arrayA
  \edef\POL@isolz@leading{\POL@arrayA{\POL@arrayA{0}}}%
  \POL@count\z@
  \xintloop
  \advance\POL@count\@ne
  \ifnum\POL@arrayA{0}>\POL@count
     \expandafter\edef\csname POL@arrayA\the\POL@count\endcsname
        {\xintDiv{\POL@arrayA\POL@count}\POL@isolz@leading}%
  \repeat
  \def\POL@isolz@E{1}% WE SEEK SMALLEST E SUCH HAT -10^E < roots < +10^E
  \advance\POL@count\m@ne
  \xintloop
  \ifnum\POL@count>\z@
     \expandafter\POL@isolz@updateE
     % use floating point to get decimal exponent
     \romannumeral0\xintfloat[4]% should I use with [2] rather? (should work)
       {\xintAdd{1/1[0]}{\xintAbs{\POL@arrayA\POL@count}}};%
  \advance\POL@count\m@ne
  \repeat
  % \ifxintverbose\xintMessage{polexpr}{Info}%
  %   {Roots a priori bounded in absolute value by 10 to the \POL@isolz@E.}%
  % \fi
}%
\def\POL@IsoRight@raw{\POL@IsoRight@Int/1[\POL@isolz@E]}%
\def\POL@IsoLeft@raw {\POL@IsoLeft@Int/1[\POL@isolz@E]}%
\def\POL@IsoRight@rawout{%
    \ifnum\POL@IsoRightSign=\z@\expandafter\xintREZ\fi\POL@IsoRight@raw
}%
\def\POL@IsoLeft@rawout{%
    \ifnum\POL@IsoRightSign=\z@
       \expandafter\xint_firstoftwo\else\expandafter\xint_secondoftwo
    \fi{\xintREZ\POL@IsoRight@raw}%
       {\POL@IsoLeft@Int/1[\POL@isolz@E]}%
}%
\def\POL@isolz@main {%
% NOTE 2018/02/16. THIS WILL PRESUMABLY BE RE-ORGANIZED IN FUTURE TO DO
% FIRST POSITIVE ROOTS THEN NEGATIVE ROOTS VIA CHANGE OF VARIABLE TO OPPOSITE.
  \global\POL@isolz@nextwillneedrefinefalse
  \def\POL@IsoRight@Int{0}%
  \POL@sturmchain@getSV@at\POL@IsoRight@raw
  \let\POL@IsoRightSV  \POL@sturmchain@SV
  \let\POL@IsoRightSign\POL@sturmchain@sign
  \let\POL@IsoAtZeroSV  \POL@IsoRightSV
  \let\POL@IsoAtZeroSign\POL@IsoRightSign
  \ifnum\POL@IsoAtZeroSign=\z@
    \xdef\POL@isolz@IntervalIndex
      {\the\numexpr\POL@isolz@minusinf@SV-\POL@IsoRightSV}%
    \POL@refine@storeleftandright % store zero root, \POL@IsoRightSign is zero
    \edef\POL@IsoRightSV{\the\numexpr\POL@IsoRightSV+\@ne}%
% subtlety here if original polynomial had multiplicities, but ok. I checked!
    \edef\POL@IsoRightSign % evaluated twice, but that's not so bad
      {\xintiiOpp{\xintiiSgn{\POL@eval{\POL@sturmname _1}{0/1[0]}}}}%
  \fi
  \def\POL@IsoLeft@Int{-1}% -10^E isn't a root!
  \let\POL@IsoLeftSV  \POL@isolz@minusinf@SV
  \let\POL@IsoLeftSign\POL@isolz@minusinf@sign
  % \POL@IsoRight@SV was modified if zero is a root
  \edef\POL@isolz@NbOfNegRoots{\the\numexpr\POL@IsoLeftSV-\POL@IsoRightSV}%
  \gdef\POL@isolz@IntervalIndex{0}%
  \let\POL@isolz@@E\POL@isolz@E
  \ifnum\POL@isolz@NbOfNegRoots>\z@
% refactored at 0.7 to fix cases leading to an intervals with zero as end-point
    \POL@isolz@findroots@neg
  \fi
  \let\POL@isolz@E\POL@isolz@@E
  \def\POL@IsoLeft@Int{0}%
  \let\POL@IsoLeftSV  \POL@IsoAtZeroSV  % véritable SV en zéro
  \let\POL@IsoLeftSign\POL@IsoAtZeroSign% véritable signe en zéro
  \ifnum\POL@IsoLeftSign=\z@
    \xdef\POL@isolz@IntervalIndex{\the\numexpr\POL@isolz@IntervalIndex+\@ne}%
  \fi
  \let\POL@@IsoRightSV  \POL@isolz@plusinf@SV
  \let\POL@@IsoRightSign\POL@isolz@plusinf@sign % 10^E not a root!
  \edef\POL@isolz@NbOfPosRoots
    {\the\numexpr\POL@IsoLeftSV-\POL@@IsoRightSV}% attention @@
  \ifnum\POL@isolz@NbOfPosRoots>\z@
    % always do that to avoid zero as end-point whether it is a root or not
    \global\POL@isolz@nextwillneedrefinetrue
    \POL@isolz@findroots@pos
  \fi
}%
\def\POL@isolz@findroots@neg{%
  \def\POL@IsoRight@Int{-1}%
  \POL@isolz@findnextzeroboundeddecade@neg
  \def\POL@IsoLeft@Int{-10}%
  \let\POL@@IsoRightSign\POL@IsoRightSign % a zero there is possible
  \let\POL@@IsoRightSV  \POL@IsoRightSV
  % this will do possibly recursive \POL@isolz@check's
  \POL@isolz@explorenexteightsubdecades@neg
  \ifnum\POL@isolz@IntervalIndex<\POL@isolz@NbOfNegRoots\space
    % above did not explore -2, -1 for this optimization (SV known at Right)
    \def\POL@IsoRight@Int{-1}%
    \let\POL@IsoRightSign\POL@@IsoRightSign
    \let\POL@IsoRightSV  \POL@@IsoRightSV
    \POL@isolz@check
    \ifnum\POL@isolz@IntervalIndex<\POL@isolz@NbOfNegRoots\space
      \def\POL@IsoLeft@Int{-1}%
      \let\POL@IsoLeftSign\POL@@IsoRightSign
      \let\POL@IsoLeftSV  \POL@@IsoRightSV
      % I don't like being inside TeX conditionals
      \expandafter\expandafter\expandafter\POL@isolz@findroots@neg
    \fi
  \fi
}%
\def\POL@isolz@findnextzeroboundeddecade@neg{%
  \xintloop
    \edef\POL@isolz@E{\the\numexpr\POL@isolz@E-\@ne}%
    \POL@sturmchain@getSV@at\POL@IsoRight@raw
    \let\POL@IsoRightSV  \POL@sturmchain@SV
    \let\POL@IsoRightSign\POL@sturmchain@sign
    % would an \ifx test be quicker? (to be checked)
  \ifnum\POL@IsoRightSV=\POL@IsoLeftSV\space
  % no roots in-between, iterate
  \repeat
}%
\def\POL@isolz@explorenexteightsubdecades@neg{%
  \xintloop
    \edef\POL@IsoRight@Int{\the\numexpr\POL@IsoLeft@Int+\@ne}%
     % we could arguably do a more efficient dichotomy here
    \POL@sturmchain@getSV@at\POL@IsoRight@raw
    \let\POL@IsoRightSV  \POL@sturmchain@SV
    \let\POL@IsoRightSign\POL@sturmchain@sign
    \POL@isolz@check % may recurse if multiple roots are to be found
    \ifnum\POL@isolz@IntervalIndex=\POL@isolz@NbOfNegRoots\space
      \expandafter\xintbreakloop
    \fi
    \let\POL@IsoLeft@Int\POL@IsoRight@Int
    \let\POL@IsoLeftSign\POL@IsoRightSign
    \let\POL@IsoLeftSV\POL@IsoRightSV
  \ifnum\POL@IsoRight@Int < -\tw@
  \repeat
}%
\def\POL@isolz@findroots@pos{%
  % remark (2018/12/08), this needs some refactoring, I hardly understand
  % the logic and it hides most into the recursion done by \POL@isolz@check
  % It would probably make more sense to proceed like done for the negative
  % but here finding the largest roots first.
  \def\POL@IsoRight@Int{1}%
  \POL@isolz@findnextzeroboundeddecade@pos
  \unless\ifnum\POL@IsoRightSV=\POL@IsoLeftSV\space
    % this actually explores the whole of some interval (0, 10^{e-1}]
    % in a context where some roots are known to be in (10^{e-1}, 10^{e}]
    % and none are larger
    \POL@isolz@check % will recurse inside groups if needed with modified E
  \fi
  % we know get the roots in the last 9 decades from 10^{e-1} to 10^{e}
  % we should arguably do a more efficient dichotomy here
  \def\POL@IsoLeft@Int{1}%
  \let\POL@IsoLeftSV\POL@IsoRightSV
  \let\POL@IsoLeftSign\POL@IsoRightSign
  \xintloop
    \edef\POL@IsoRight@Int{\the\numexpr\POL@IsoLeft@Int+\@ne}%
    \POL@sturmchain@getSV@at\POL@IsoRight@raw
    \let\POL@IsoRightSV  \POL@sturmchain@SV
    \let\POL@IsoRightSign\POL@sturmchain@sign
    \POL@isolz@check % recurses in needed
    \let\POL@IsoLeft@Int\POL@IsoRight@Int
    \let\POL@IsoLeftSign\POL@IsoRightSign
    \let\POL@IsoLeftSV\POL@IsoRightSV
    \ifnum\POL@isolz@IntervalIndex=\POL@isolz@NbOfRoots\space
      \expandafter\xintbreakloop
    \fi
    \ifnum\POL@IsoLeft@Int < \xint_c_ix
  \repeat
  \ifnum\POL@isolz@IntervalIndex<\POL@isolz@NbOfRoots\space
  % get now the last, rightmost, root (or roots)
    \def\POL@IsoRight@Int{10}%
    \let\POL@IsoRightSign\POL@@IsoRightSign
    \let\POL@IsoRightSV\POL@@IsoRightSV
    \POL@isolz@check
  \fi
}%
\def\POL@isolz@findnextzeroboundeddecade@pos{%
  \xintloop
    \edef\POL@isolz@E{\the\numexpr\POL@isolz@E-\@ne}%
    \POL@sturmchain@getSV@at\POL@IsoRight@raw
    \let\POL@IsoRightSV  \POL@sturmchain@SV
    \let\POL@IsoRightSign\POL@sturmchain@sign
  \ifnum\POL@IsoRightSV=\POL@@IsoRightSV\space
    \let\POL@@IsoRightSign\POL@IsoRightSign % root here possible!
  \repeat
}%
\def\POL@isolz@check{% \POL@IsoRightSign must be ready for use here
% \ifxintverbose
%   \xintMessage{polexpr}{Info}%
%   {\the\numexpr\POL@IsoLeftSV-\POL@IsoRightSV\relax\space roots
%    in (\POL@IsoLeft@raw,\POL@IsoRight@raw] (E = \POL@isolz@E)}%
% \fi
    \ifcase\numexpr\POL@IsoLeftSV-\POL@IsoRightSV\relax
    % no root in ]left, right]
      \global\POL@isolz@nextwillneedrefinefalse
    \or
    % exactly one root in ]left, right]
     \xdef\POL@isolz@IntervalIndex{\the\numexpr\POL@isolz@IntervalIndex+\@ne}%
     \ifnum\POL@IsoRightSign=\z@
       % if right boundary is a root, ignore previous flag
       \global\POL@isolz@nextwillneedrefinefalse
     \fi
     % if left boundary is known to have been a root we refine interval
     \ifPOL@isolz@nextwillneedrefine
       \expandafter\expandafter\expandafter\POL@isolz@refine
     \else
       % \POL@IsoRightSign is zero iff root now exactly known
       \POL@refine@storeleftandright
       \ifnum\POL@IsoRightSign=\z@
        \global\POL@isolz@nextwillneedrefinetrue
       \fi
     \fi
    \else
    % more than one root, we need to recurse
     \expandafter\POL@isolz@recursedeeper
    \fi
}%
\def\POL@isolz@recursedeeper{%
% NOTE 2018/02/16. I SHOULD DO A REAL BINARY DICHOTOMY HERE WHICH ON AVERAGE
% SHOULD BRING SOME GAIN (LIKE WHAT IS ALREADY DONE FOR THE "refine" MACROS.
% THUS IN FUTURE THIS MIGHT BE REFACTORED.
\begingroup
  \edef\POL@isolz@E{\the\numexpr\POL@isolz@E-\@ne}%
  \edef\POL@@IsoRight@Int{\xintDSL{\POL@IsoRight@Int}}%
  \let\POL@@IsoRightSign  \POL@IsoRightSign
  \let\POL@@IsoRightSV    \POL@IsoRightSV
  \edef\POL@IsoLeft@Int  {\xintDSL{\POL@IsoLeft@Int}}%
  \xintiloop[1+1]
    \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}%
    \POL@sturmchain@getSV@at\POL@IsoRight@raw
    \let\POL@IsoRightSV  \POL@sturmchain@SV
    \let\POL@IsoRightSign\POL@sturmchain@sign
    \POL@isolz@check
    \let\POL@IsoLeft@Int\POL@IsoRight@Int
    \let\POL@IsoLeftSV\POL@IsoRightSV
    \let\POL@IsoLeftSign\POL@IsoRightSign% not used, actually
  \ifnum\POL@IsoLeftSV=\POL@@IsoRightSV\space
     \expandafter\xintbreakiloop
  \fi
  \ifnum\xintiloopindex < \xint_c_ix
  \repeat
  \let\POL@IsoRight@Int\POL@@IsoRight@Int
  \let\POL@IsoRightSign\POL@@IsoRightSign
  \let\POL@IsoRightSV  \POL@@IsoRightSV
   % if we exited the loop via breakiloop this is superfluous
   % but it only costs one \ifnum
  \POL@isolz@check
\endgroup
}%
\def\POL@isolz@refine{%
  % starting point is first root = left < unique second root < right
  % even if we hit exactly via refinement second root, we set flag false as
  % processing will continue with original right end-point, which isn't a root
  \global\POL@isolz@nextwillneedrefinefalse
\begingroup
  \let\POL@@IsoRightSign\POL@IsoRightSign % already evaluated
  \xintloop
    \edef\POL@isolz@E{\the\numexpr\POL@isolz@E-\@ne}%
    \edef\POL@IsoLeft@Int {\xintDSL{\POL@IsoLeft@Int}}%
    \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}%
    \edef\POL@IsoRightSign
        {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
  \ifnum\POL@IsoRightSign=\POL@@IsoRightSign\space
  \repeat
  % now second root has been separated from the one at left end point
% we update the storage of the root at left for it to have the same number
% of digits in mantissa. No, I decided not to do that to avoid complications.
  % \begingroup
  %   \let\POL@IsoRight@Int\POL@IsoLeft@Int
  %   \def\POL@IsoRightSign{0}%
  %   \edef\POL@isolz@IntervalIndex{\the\numexpr\POL@isolz@IntervalIndex-\@ne}%
  %   \POL@refine@storeleftandright
  % \endgroup
  \edef\POL@@IsoRight@Int{\xintDSL{\xintInc{\xintDSR{\POL@IsoLeft@Int}}}}%
  \let\POL@IsoLeft@Int\POL@IsoRight@Int
  \let\POL@IsoLeftSign\POL@IsoRightSign
  \ifnum\POL@IsoRightSign=\z@ % check if new Left is actually a root
  \else
    \edef\POL@IsoRight@Int{\xintDec{\POL@@IsoRight@Int}}%
    \edef\POL@IsoRightSign
      {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
    \ifnum\POL@IsoRightSign=\POL@@IsoRightSign\space
      \POL@refine@doonce % we need to locate in interval (1, 9) in local scale
    \else
    \let\POL@IsoLeft@Int\POL@IsoRight@Int
    \ifnum\POL@IsoRightSign=\z@
      \def\POL@IsoLeftSign{0}%
    \else
      \let\POL@IsoRight@Int\POL@@IsoRight@Int
      % the IsoRightSign is now wrong but here we don't care
    \fi\fi
  \fi
  % on exit, exact root found iff \POL@IsoRightSign is zero
  \POL@refine@storeleftandright
\endgroup
}%
\def\POL@refine@doonce{% if exact root is found, always in IsoRight on exit
% NOTE: FUTURE REFACTORING WILL GET RID OF \xintiiAdd WHICH ARE A BIT COSTLY
% BUT BASICALLY NEEDED TO HANDLE BOTH NEGATIVE AND POSITIVE HERE.
% I WILL RE-ORGANIZE THE WHOLE THING IN FUTURE TO GET ROOTS STARTING FROM
% THE ORIGIN AND SIMPLY RE-LABEL THE NEGATIVE ONE AT THE END. 2018/02/16.
  \let\POL@@IsoRight@Int\POL@IsoRight@Int % 9
  \let\POL@@IsoRightSign\POL@IsoRightSign
  \edef\POL@IsoRight@Int{\xintiiAdd{4}{\POL@IsoLeft@Int}}% 5
  \edef\POL@IsoRightSign
      {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
  \ifnum\POL@IsoRightSign=\POL@IsoLeftSign\space
    \let\POL@IsoLeft@Int\POL@IsoRight@Int % 5
    \edef\POL@IsoRight@Int{\xintiiAdd{2}{\POL@IsoLeft@Int}}%
    \edef\POL@IsoRightSign
        {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
    \ifnum\POL@IsoRightSign=\POL@IsoLeftSign\space
      \let\POL@IsoLeft@Int\POL@IsoRight@Int % 7
      \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}%
      \edef\POL@IsoRightSign
          {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
      \ifnum\POL@IsoRightSign=\POL@IsoLeftSign\space
        \let\POL@IsoLeft@Int\POL@IsoRight@Int % 8
        \let\POL@IsoRight@Int\POL@@IsoRight@Int % 9
        \let\POL@IsoRightSign\POL@@IsoRightSign % opposite of one at left
      \fi % else 7, 8 with possible root at 8
    \else
    \ifnum\POL@IsoRightSign=\z@
      \let\POL@IsoLeft@Int\POL@IsoRight@Int % root at 7
      \def\POL@IsoLeftSign{0}%
    \else
      \let\POL@@IsoRight@Int\POL@IsoRight@Int % 7
      \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}% 6
      \edef\POL@IsoRightSign
          {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
      \ifnum\POL@IsoRightSign=\POL@IsoLeftSign\space
          \let\POL@IsoLeft@Int\POL@IsoRight@Int   % 6
          \let\POL@IsoRight@Int\POL@@IsoRight@Int % 7
          \let\POL@IsoRightSign\POL@@IsoRightSign
      \fi % else 5, 6 with possible root at 6
    \fi\fi
  \else
  \ifnum\POL@IsoRightSign=\z@
    \let\POL@IsoLeft@Int\POL@IsoRight@Int % root at 5
    \def\POL@IsoLeftSign{0}%
  \else
    \let\POL@@IsoRight@Int\POL@IsoRight@Int % 5
    \edef\POL@IsoRight@Int{\xintiiAdd{2}{\POL@IsoLeft@Int}}%
    \edef\POL@IsoRightSign
        {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
    \ifnum\POL@IsoRightSign=\POL@IsoLeftSign\space
      \let\POL@IsoLeft@Int\POL@IsoRight@Int % 3
      \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}% 4
      \edef\POL@IsoRightSign
          {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
      \ifnum\POL@IsoRightSign=\POL@IsoLeftSign\space
          \let\POL@IsoLeft@Int\POL@IsoRight@Int   % 4
          \let\POL@IsoRight@Int\POL@@IsoRight@Int % 5
          \let\POL@IsoRightSign\POL@@IsoRightSign
      \fi % else 3, 4 with possible root at 4
    \else
    \ifnum\POL@IsoRightSign=\z@
      \let\POL@IsoLeft@Int\POL@IsoRight@Int % root at 3
      \def\POL@IsoLeftSign{0}%
    \else
      \let\POL@@IsoRight@Int\POL@IsoRight@Int % 3
      \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}% 2
      \edef\POL@IsoRightSign
          {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
      \ifnum\POL@IsoRightSign=\POL@IsoLeftSign\space
          \let\POL@IsoLeft@Int\POL@IsoRight@Int   % 2
          \let\POL@IsoRight@Int\POL@@IsoRight@Int % 3
          \let\POL@IsoRightSign\POL@@IsoRightSign
      \fi % else 1, 2 with possible root at 2
    \fi\fi
  \fi\fi
}%
\def\POL@refine@storeleftandright{%
    \expandafter
    \xdef\csname POL_ZL\POL@sturmname*\POL@isolz@IntervalIndex\endcsname
         {\PolDecToString{\POL@IsoLeft@rawout}}%
    \expandafter
    \xdef\csname POL_ZR\POL@sturmname*\POL@isolz@IntervalIndex\endcsname
         {\PolDecToString{\POL@IsoRight@rawout}}%
    % added at 0.6
    \ifnum\POL@IsoRightSign=\z@
      \global
      \expandafter
      \let\csname POL_ZK\POL@sturmname*\POL@isolz@IntervalIndex\endcsname
          \xint_stop_atfirstoftwo
    \fi
    \begingroup\xintglobaldefstrue
    % skip some overhead of \xintdefvar...
    % Let me repeat: ATTENTION to change of internal format at xint 1.4
      \XINT_expr_defvar_one{\POL@sturmname L_\POL@isolz@IntervalIndex}%
         {{\POL@IsoLeft@rawout}}%
      \XINT_expr_defvar_one{\POL@sturmname R_\POL@isolz@IntervalIndex}%
         {{\POL@IsoRight@rawout}}%
      % added at 0.7
      \XINT_expr_defvar_one{\POL@sturmname Z_\POL@isolz@IntervalIndex _isknown}%
         {{\ifnum\POL@IsoRightSign=\z@ 1\else 0\fi}}%
    \endgroup
}%
%% \PolRefineInterval
%% ATTENTION TO xint 1.4 INTERNAL CHANGES
\def\POL@xintexprGetVar#1{\expandafter\expandafter\expandafter\xint_firstofone
                          \csname XINT_expr_varvalue_#1\endcsname}%
% attention, also used by \POL@findrat@loop@a
\def\POL@get@IsoLeft@rawin{%
    \edef\POL@IsoLeft@rawin
     {\POL@xintexprGetVar{\POL@sturmname L_\POL@isolz@IntervalIndex}}%
}%
% attention, also used by \POL@findrat@loop@a
\def\POL@get@IsoRight@rawin{%
    \edef\POL@IsoRight@rawin
     {\POL@xintexprGetVar{\POL@sturmname R_\POL@isolz@IntervalIndex}}%
}%
% attention, also used by \POL@findrat@loop@a
\def\POL@get@Int@aux #1/1[#2]#3#4{\edef#3{\xintDSH{#4-#2}{#1}}}%
\def\POL@get@IsoLeft@Int{%
    \expandafter\POL@get@Int@aux\POL@IsoLeft@rawin\POL@IsoLeft@Int\POL@isolz@E
}%
\def\PolRefineInterval{\POL@ifstar\POL@srefine@start\POL@refine@start}%
\def\POL@refine@start{%
  \POL@chkopt\POL@oPOL@refine@start[1]%
}%
\def\POL@oPOL@refine@start[#1]#2#3{%
  \edef\POL@isolz@IntervalIndex{\the\numexpr#3}%
  \edef\POL@sturmname{#2}%
  \expandafter\POL@refine@sharedbody\expandafter
    {\expandafter\POL@refine@loop\expandafter{\the\numexpr#1}}%
}%
\def\POL@srefine@start#1#2{%
  \edef\POL@isolz@IntervalIndex{\the\numexpr#2}%
  \edef\POL@sturmname{#1}%
  \POL@refine@sharedbody
    {\let\POL@refine@left@next\POL@refine@main  % we want to recurse if needed
     \let\POL@refine@right@next\POL@refine@main % we want to recurse if needed
     \POL@refine@main}%
}%
\def\POL@refine@sharedbody#1{%
  \POL@get@IsoLeft@rawin
  \edef\POL@IsoLeftSign
      {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoLeft@rawin}}}%
  \ifnum\POL@IsoLeftSign=\z@
  % do nothing if that interval was already a singleton
  \else
  % else both end-points are not roots and there is a single one in-between
    \POL@get@IsoRight@rawin
    \edef\POL@IsoRightSign{\the\numexpr-\POL@IsoLeftSign}%
    \edef\POL@isolz@E{\expandafter\POL@refine@getE
         % je pense que le xintrez ici est superflu
         \romannumeral0\xintrez{\xintSub{\POL@IsoRight@rawin}{\POL@IsoLeft@rawin}}}%
    \POL@get@IsoLeft@Int
    \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}%
    #1%
    \POL@refine@storeleftandright % \POL@IsoRightSign not zero
  \fi
}%
\def\POL@refine@loop#1{%
    \let\POL@refine@left@next \empty % no recursion at end sub-intervals
    \let\POL@refine@right@next\empty
    \xintiloop[1+1]
      \POL@refine@main
      \ifnum\POL@IsoRightSign=\z@
        \expandafter\xintbreakiloop
      \fi
    \ifnum\xintiloopindex<#1 %
    \repeat
}%
\def\POL@refine@main{%
  \edef\POL@isolz@E{\the\numexpr\POL@isolz@E-\@ne}%
  \edef\POL@IsoLeft@Int{\xintDSL{\POL@IsoLeft@Int}}%
  \edef\POL@IsoRight@Int{\xintDSL{\POL@IsoRight@Int}}%
  \let\POL@@IsoRight@Int\POL@IsoRight@Int
  \let\POL@@IsoRightSign\POL@IsoRightSign
  \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}%
  \edef\POL@IsoRightSign
      {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
  \ifnum\POL@IsoRightSign=\z@
   \let\POL@IsoLeft@Int\POL@IsoRight@Int % root at 1
   \def\POL@IsoLeftSign{0}%
   \let\POL@next\empty
  \else
  \ifnum\POL@IsoRightSign=\POL@@IsoRightSign\space
    \let\POL@next\POL@refine@left@next % may be \empty or \POL@refine@main for recursion
    \let\POL@refine@right@next\empty
  \else
    \let\POL@IsoLeft@Int\POL@IsoRight@Int
    \edef\POL@IsoRight@Int{\xintDec{\POL@@IsoRight@Int}}%
    \edef\POL@IsoRightSign
      {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
    \ifnum\POL@IsoRightSign=\z@
     \let\POL@IsoLeft@Int\POL@IsoRight@Int % root at 9
     \def\POL@IsoLeftSign{0}%
     \let\POL@next\empty
    \else
     \ifnum\POL@IsoRightSign=\POL@@IsoRightSign\space
      \let\POL@next\POL@refine@doonce
     \else
      \let\POL@IsoLeft@Int\POL@IsoRight@Int
      \let\POL@IsoRight@Int\POL@@IsoRight@Int
      \let\POL@IsoRightSign\POL@@IsoRightSign
      \let\POL@next\POL@refine@right@next
      \let\POL@refine@left@next\empty
     \fi
    \fi
  \fi\fi
  \POL@next
}%
% lacking pre-defined xintfrac macro here (such as an \xintRawExponent)
\def\POL@refine@getE#1[#2]{#2}% \xintREZ already applied, for safety
%
%
\def\PolIntervalWidth#1#2{%
% le \xintRez est à cause des E positifs, car trailing zéros explicites
% si je travaillais à partir des variables xintexpr directement ne devrait
% pas être nécessaire, mais trop fragile par rapport à chgt internes possibles
     \romannumeral0\xintrez{\xintSub{\@nameuse{POL_ZR#1*}{#2}}%
                                    {\@nameuse{POL_ZL#1*}{#2}}}
}%
\def\PolEnsureIntervalLengths#1#2{% #1 = Sturm chain name,
   % localize roots in intervals of length at most 10^{#2}
   \edef\POL@sturmname{#1}%
   \edef\POL@ensure@targetE{\the\numexpr#2}%
   \edef\POL@nbofroots{\csname POL_ZL\POL@sturmname*0\endcsname}%
   \ifnum\POL@nbofroots>\z@
      \expandafter\POL@ensureintervallengths
   \fi
}%
\def\POL@ensureintervallengths{%
   \POL@count\z@
   % \POL@count used by \POL@sturmchain@getSV@at but latter not used
   \xintloop
     \advance\POL@count\@ne
     \edef\POL@isolz@IntervalIndex{\the\POL@count}%
     \POL@ensure@one
   \ifnum\POL@nbofroots>\POL@count
   \repeat
}%
\def\PolEnsureIntervalLength#1#2#3{% #1 = Sturm chain name,
   % #2 = index of interval
   % localize roots in intervals of length at most 10^{#3}
   \edef\POL@sturmname{#1}%
   \edef\POL@ensure@targetE{\the\numexpr#3}%
   \edef\POL@isolz@IntervalIndex{\the\numexpr#2}%
% peut-être autoriser -1, -2, ... ?
   \ifnum\POL@isolz@IntervalIndex>\z@
% 0.7, add this safeguard but attention means this structure must be in place
   \ifnum\csname POL_ZL\POL@sturmname*0\endcsname>\z@
% je ne fais pas les \expandafter mais je préfèrerais ne pas être à l'intérieur
     \POL@ensure@one
   \fi
   \fi
}%
\def\POL@ensure@one{%
    \POL@get@IsoLeft@rawin
    \POL@get@IsoRight@rawin
    \edef\POL@ensure@delta{\xintREZ{\xintSub{\POL@IsoRight@rawin}{\POL@IsoLeft@rawin}}}%
    \xintiiifZero{\POL@ensure@delta}
      {}
      {\edef\POL@isolz@E{\expandafter\POL@refine@getE\POL@ensure@delta}%
       \POL@get@IsoLeft@Int
       \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}%
       \ifnum\POL@isolz@E>\POL@ensure@targetE\space
         \edef\POL@IsoLeftSign
          {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoLeft@raw}}}%
          % at start left and right are not roots, and values of opposite signs
         % \edef\POL@IsoRightSign{\the\numexpr-\POL@IsoLeftSign}%
         \xintloop
           \POL@ensure@Eloopbody % decreases E by one at each iteration
          % if separation level is still too coarse we recurse at deeper level
         \ifnum\POL@isolz@E>\POL@ensure@targetE\space
         \repeat
         % will check if right is at a zero, it needs \POL@IsoRightSign set up
         \POL@refine@storeleftandright
       \fi
      }%
}%
\def\POL@ensure@Eloopbody {%
    \edef\POL@isolz@E{\the\numexpr\POL@isolz@E-\@ne}%
    \edef\POL@IsoLeft@Int{\xintDSL{\POL@IsoLeft@Int}}%
    % this will loop at most ten times
    \xintloop
      \edef\POL@IsoRight@Int{\xintInc{\POL@IsoLeft@Int}}%
      \edef\POL@IsoRightSign
          {\xintiiSgn{\POL@eval{\POL@sturmname _0}{\POL@IsoRight@raw}}}%
          % if we have found a zero at right boundary the \ifnum test will fail
          % and we exit the loop
          % else we exit the loop if sign at right boundary is opposite of
          % sign at left boundary (the latter is +1 or -1, never 0)
    % this is a bit wasteful if we go ten times to the right, because
    % we know that there the sign will be opposite, evaluation was superfluous
    \ifnum\POL@IsoLeftSign=\POL@IsoRightSign\space
      \let\POL@IsoLeft@Int\POL@IsoRight@Int
    \repeat
          % check for case when we exited the inner loop because we actually
          % found a zero, then we force exit from the main (E decreasing) loop
    \ifnum\POL@IsoRightSign=\z@
      \expandafter\xintbreakloop
    \fi
}%
%
%% \PolPrintIntervals
\catcode`_ 8 %
\catcode`& 4 %
\def\PolPrintIntervals{\POL@ifstar{\PolPrintIntervals@@}{\PolPrintIntervals@}}%
% As explained in the docs, this is an example of customization so is not
% itself customizable, apart from redefining it entirely!
\def\PolPrintIntervals@@{%
 \begingroup
   \def\POL@AfterPrintIntervals{\endgroup}%
   \let\PolPrintIntervalsPrintExactZero\POL@@PrintIntervalsPrintExactZero
   \let\PolPrintIntervalsUnknownRoot\POL@@PrintIntervalsUnknownRoot
   \let\PolPrintIntervalsKnownRoot\POL@@PrintIntervalsKnownRoot
\ifdefined\array
   \def\arraystretch{2}%
   \def\PolPrintIntervalsBeginEnv{\[\begin{array}{cl}}%\]
   \def\PolPrintIntervalsEndEnv{\end{array}\]}%
\else
   \def\PolPrintIntervalsBeginEnv{$$\tabskip0pt plus 1000pt minus 1000pt
        \halign to\displaywidth\bgroup
        \hfil\vrule height 2\ht\strutbox
                    depth  2\dp\strutbox
                    width  \z@
        $####$\tabskip6pt&$####$\hfil
        \tabskip0pt plus 1000pt minus 1000pt\cr}%$$
   \def\PolPrintIntervalsEndEnv{\crcr\egroup$$}%$$
\fi
 \PolPrintIntervals@
}%
\def\PolPrintIntervals@{%
  \POL@chkopt\POL@oPolPrintIntervals@[Z]%
}%
\def\POL@oPolPrintIntervals@[#1]#2{%
   \def\PolPrintIntervalsTheVar{#1}%
   \def\PolPrintIntervalsTheSturmName{#2}%
   \ifnum\@nameuse{POL_ZL#2*}{0}=\z@
     \PolPrintIntervalsNoRealRoots
   \else
     \gdef\PolPrintIntervalsTheIndex{1}%
     \POL@PrintIntervals@DoDefs
     \begingroup\edef\POL@tmp{\endgroup
       \unexpanded\expandafter{\PolPrintIntervalsBeginEnv}%
       \unexpanded\expandafter{\POL@PrintIntervals@Loop}%
       \unexpanded\expandafter{\PolPrintIntervalsEndEnv}%
     }\POL@tmp
   \fi
   \POL@AfterPrintIntervals
   \def\PolPrintIntervalsTheVar{#1}%
   \def\PolPrintIntervalsTheSturmName{#2}%
}%
\let\POL@AfterPrintIntervals\empty
\let\PolPrintIntervalsNoRealRoots\empty
\def\PolPrintIntervalsArrayStretch{1}%
\ifdefined\array
    \def\PolPrintIntervalsBeginEnv{\[\begin{array}{rcccl}}%
    \def\PolPrintIntervalsEndEnv{\end{array}\]}%
\else
    \def\PolPrintIntervalsBeginEnv
     {$$\tabskip 0pt plus 1000pt minus 1000pt
       \halign to\displaywidth\bgroup 
       \hfil\vrule height\PolPrintIntervalsArrayStretch\ht\strutbox
                   depth \PolPrintIntervalsArrayStretch\dp\strutbox
                   width \z@
       $##$\tabskip 6pt &\hfil $##$\hfil &\hfil $##$\hfil &\hfil $##$\hfil &$##$\hfil
       \tabskip 0pt plus 1000pt minus 1000pt \cr
      }%$$
    \def\PolPrintIntervalsEndEnv{\crcr\egroup$$}%$$
\fi
\def\PolPrintIntervalsKnownRoot{%
  &&\PolPrintIntervalsTheVar_{\PolPrintIntervalsTheIndex}%
  &=&\PolPrintIntervalsPrintExactZero
}%
\def\PolPrintIntervalsUnknownRoot{%
  \PolPrintIntervalsPrintLeftEndPoint&<&%
  \PolPrintIntervalsTheVar_{\PolPrintIntervalsTheIndex}&<&%
  \PolPrintIntervalsPrintRightEndPoint
}%
\def\PolPrintIntervalsPrintExactZero    {\PolPrintIntervalsTheLeftEndPoint}%
\def\PolPrintIntervalsPrintLeftEndPoint {\PolPrintIntervalsTheLeftEndPoint}%
\def\PolPrintIntervalsPrintRightEndPoint{\PolPrintIntervalsTheRightEndPoint}%
%
\ifdefined\mbox
\def\PolPrintIntervalsPrintMultiplicity{(\mbox{mult. }\PolPrintIntervalsTheMultiplicity)}%
\else
\def\PolPrintIntervalsPrintMultiplicity{(\hbox{mult. }\PolPrintIntervalsTheMultiplicity)}%
\fi
%
\def\POL@@PrintIntervalsKnownRoot{%
   \PolPrintIntervalsPrintMultiplicity&%
   \PolPrintIntervalsTheVar_{\PolPrintIntervalsTheIndex}=%
   \PolPrintIntervalsPrintExactZero
}%
\ifdefined\frac
\def\POL@@PrintIntervalsPrintExactZero{%
   \displaystyle
   \xintTeXsignedFrac{\PolPrintIntervalsTheLeftEndPoint}%
}%
\else
\def\POL@@PrintIntervalsPrintExactZero{%
   \displaystyle
   \xintTeXsignedOver{\PolPrintIntervalsTheLeftEndPoint}%
}%
\fi
\def\POL@@PrintIntervalsUnknownRoot{%
   \PolPrintIntervalsPrintMultiplicity&%
   \xintifSgn{\PolPrintIntervalsTheLeftEndPoint}%
     {\xintifSgn{\PolPrintIntervalsTheRightEndPoint}
       {\PolPrintIntervalsTheVar_{\PolPrintIntervalsTheIndex}=%
        \PolPrintIntervalsPrintRightEndPoint\dots}%
      {0>\PolPrintIntervalsTheVar_{\PolPrintIntervalsTheIndex}>%
        \PolPrintIntervalsPrintLeftEndPoint}%
      {\PolErrorThisShouldNotHappenPleaseReportToAuthorA}}%
    {\xintifSgn{\PolPrintIntervalsTheRightEndPoint}
      {\PolErrorThisShouldNotHappenPleaseReportToAuthorB}%
      {\PolErrorThisShouldNotHappenPleaseReportToAuthorC}%
      {0<\PolPrintIntervalsTheVar_{\PolPrintIntervalsTheIndex}<%
        \PolPrintIntervalsPrintRightEndPoint}}%
    {\xintifSgn{\PolPrintIntervalsTheRightEndPoint}
      {\PolErrorThisShouldNotHappenPleaseReportToAuthorD}%
      {\PolErrorThisShouldNotHappenPleaseReportToAuthorE}%
      {\PolPrintIntervalsTheVar_{\PolPrintIntervalsTheIndex}=%
        \PolPrintIntervalsPrintLeftEndPoint\dots}}%
}%
\catcode`& 7 %
\catcode`_ 11 %
\def\POL@PrintIntervals@Loop#1{%
\def\POL@PrintIntervals@Loop{%
  \POL@SturmIfZeroExactlyKnown\PolPrintIntervalsTheSturmName
                              \PolPrintIntervalsTheIndex
    \PolPrintIntervalsKnownRoot
    \PolPrintIntervalsUnknownRoot
  \xdef\PolPrintIntervalsTheIndex{\the\numexpr\PolPrintIntervalsTheIndex+\@ne}%
  \unless\ifnum\PolPrintIntervalsTheIndex>
               \@nameuse{POL_ZL\PolPrintIntervalsTheSturmName*0}
     \POL@PrintIntervals@DoDefs
     \xint_afterfi{#1\POL@PrintIntervals@Loop}%
  \fi
}}%
\ifdefined\array\POL@PrintIntervals@Loop{\\}\else\POL@PrintIntervals@Loop{\cr}\fi
\def\POL@PrintIntervals@DoDefs{%
  \xdef\PolPrintIntervalsTheLeftEndPoint{%
     \csname POL_ZL\PolPrintIntervalsTheSturmName*\PolPrintIntervalsTheIndex
     \endcsname
  }%
  \xdef\PolPrintIntervalsTheRightEndPoint{%
     \csname POL_ZR\PolPrintIntervalsTheSturmName*\PolPrintIntervalsTheIndex
     \endcsname
  }%
  \xdef\PolPrintIntervalsTheMultiplicity{%
     \ifcsname POL_ZM\PolPrintIntervalsTheSturmName*\PolPrintIntervalsTheIndex
     \endcsname
     \csname POL_ZM\PolPrintIntervalsTheSturmName*\PolPrintIntervalsTheIndex
     \endcsname
     \else
     ?% or use 0 ?
     \fi
  }%
}%
%
%% Expandable interface
%
\def\PolSturmIfZeroExactlyKnown#1#2{% #1 = sturmname, #2=index
    \romannumeral0\csname POL_ZK#1*\endcsname{#2}%
}%
\def\POL@SturmIfZeroExactlyKnown#1#2{% #1 = sturmname, #2=index
    \romannumeral0\csname POL_ZK#1*\the\numexpr#2\endcsname
}%
\def\PolSturmIsolatedZeroMultiplicity#1#2{%
    \romannumeral`&&@\csname POL_ZM#1*\endcsname{#2}%
}%
\def\PolSturmIsolatedZeroLeft#1#2{%
    \romannumeral`&&@\csname POL_ZL#1*\endcsname{#2}%
}%
\def\PolSturmIsolatedZeroRight#1#2{%
    \romannumeral`&&@\csname POL_ZR#1*\endcsname{#2}%
}%
\def\PolSturmNbOfIsolatedZeros#1{%
    \romannumeral`&&@\csname POL_ZL#1*0\endcsname
}%
\def\PolSturmRationalRoot#1#2{%
    \romannumeral`&&@\csname POL_ZL#1*%
                     \csname POL_RI#1*\endcsname{#2}\endcsname
}%
\def\PolSturmRationalRootIndex#1#2{%
    \romannumeral`&&@\csname POL_RI#1*\endcsname{#2}%
}%
\def\PolSturmRationalRootMultiplicity#1#2{%
    \romannumeral`&&@\csname POL_ZM#1%
                     *\csname POL_RI#1*\endcsname{#2}\endcsname
}%
\def\PolSturmNbOfRationalRoots#1{%
    \romannumeral`&&@\csname POL_RI#1*0\endcsname
}%
\def\PolSturmNbOfRationalRootsWithMultiplicities#1{%
% means the \POL@norr must not have been changed in-between...
    \the\numexpr\PolDegree{#1}-\PolDegree{#1\POL@norr}\relax
}%
\def\PolSturmIntervalIndex#1#2#3{\the\numexpr\POL@eval@fork
     #2\PolSturmIntervalIndexAt
     \At\PolSturmIntervalIndexAtExpr\krof {#1}{#3}%
}%
\def\PolSturmIntervalIndexAtExpr#1#2{%
    \PolSturmIntervalIndexAt{#1}{\xinttheexpr#2\relax}%
}%
% ! is of catcode 11 in all of polexpr
\def\PolSturmIntervalIndexAt#1#2{%
    \expandafter\POL@sturm@index@at\romannumeral`&&@#2!{#1}\xint_bye\relax
}%
\def\POL@sturm@index@at#1!#2%
{%
    \expandafter\POL@sturm@index@at@iloop 
    \romannumeral`&&@\PolSturmNbOfIsolatedZeros{#2}!{#2}{#1}%
}%
% implementation is sub-optimal as it should use some kind of binary tree
% search rather than comparing to the intervals from right to left as here
\def\POL@sturm@index@at@iloop #1!%
{%
    \ifnum #1=\z@ 0\expandafter\xint_bye\fi
    \POL@sturm@index@at@iloop@a #1!%
}%
\def\POL@sturm@index@at@iloop@a #1!#2#3%
{% #1 = index, #2 = sturmname, #3 value
    \PolSturmIfZeroExactlyKnown{#2}{#1}
    {\xintifCmp{#3}{\POL@xintexprGetVar{#2L_#1}}%
       {}%
       {#1\xint_bye}%
       {0\xint_bye}%
    }%
    {\xintifGt{#3}{\POL@xintexprGetVar{#2L_#1}}%
       {\xintifLt{#3}{\POL@xintexprGetVar{#2R_#1}}%
        {#1\xint_bye}%
        {0\xint_bye}%
       }%
       {}%
    }%
    % attention that catcode of ! is 11 in polexpr.sty
    \expandafter\POL@sturm@index@at@iloop\the\numexpr#1-\@ne !{#2}{#3}%
}%
%
\def\POL@leq@fork#1\LessThanOrEqualTo#2#3\krof{#2}%
\def\PolSturmNbOfRootsOf#1#2#3{%
   \romannumeral`&&@\POL@leq@fork
     #2\PolNbOfRootsLessThanOrEqualTo
     \LessThanOrEqualTo\PolNbOfRootsLessThanOrEqualToExpr
   \krof {#1}{#3}%
}%
\def\PolNbOfRootsLessThanOrEqualToExpr#1#2{%
    \PolNbOfRootsLessThanOrEqualTo{#1}{\xinttheexpr#2\relax}%
}%
\def\PolNbOfRootsLessThanOrEqualTo#1{%
    \ifnum\PolSturmNbOfIsolatedZeros{#1}=\z@
      \expandafter\xint_firstofthree\expandafter0%
    \else
      \expandafter\PolNbOfRootsLessThanOrEqualTo@%
    \fi {#1}%
}%
\def\PolNbOfRootsLessThanOrEqualTo@ #1#2%
{%
    \expandafter\POL@nbofrootsleq@prep\romannumeral`&&@#2!{#1}%
}%
\def\POL@nbofrootsleq@prep#1!#2%
{%
    \expandafter\POL@nbofrootsleq@iloop\expandafter 1\expandafter !%
    \romannumeral0\xintsgn{\POL@eval{#2_0}{#1}}!%
    #1!{#2}%
}%
\def\POL@nbofrootsleq@iloop#1!#2!#3!#4%
{% #1 = index, #2 = sign of evaluation at value, #3 = value, #4 = sturmname
    \xintifCmp{#3}{\POL@xintexprGetVar{#4L_#1}}%
      {\POL@nbofrootsleq@return #1-\@ne !}%
      {\POL@nbofrootsleq@return
       \PolSturmIfZeroExactlyKnown{#4}{#1}{#1}{#1-\@ne}!%
      }%
      % in third branch we are sure that if root is exactly known
      % the test \xintifLt will be negative
      {\xintifLt{#3}{\POL@xintexprGetVar{#4R_#1}}%
         {\POL@nbofrootsleq@return
            #1\ifnum#2=\xintSgn{\POL@eval{#4_0}{\POL@xintexprGetVar{#4L_#1}}}
              -\@ne\fi !%
         }%
         {\ifnum#1=\PolSturmNbOfIsolatedZeros{#4}
            \expandafter\POL@nbofrootsleq@rightmost
          \fi \expandafter\POL@nbofrootsleq@iloop \the\numexpr\@ne+%
         }%
       }%
    #1!#2!#3!{#4}%
}%
\def\POL@nbofrootsleq@return #1!#2!#3!#4!#5{\the\numexpr #1\relax}%
\def\POL@nbofrootsleq@rightmost\expandafter\POL@nbofrootsleq@iloop 
    \the\numexpr\@ne+#1!#2!#3!#4{#1}%
%
\def\PolSturmNbWithMultOfRootsOf#1#2#3{%
     \the\numexpr0\POL@leq@fork
     #2\PolNbWithMultOfRootsLessThanOrEqualTo
     \LessThanOrEqualTo\PolNbWithMultOfRootsLessThanOrEqualToExpr\krof {#1}{#3}%
}%
\def\PolNbWithMultOfRootsLessThanOrEqualToExpr#1#2{%
    \PolNbWithMultOfRootsLessThanOrEqualTo{#1}{\xinttheexpr#2\relax}%
}%
\def\PolNbWithMultOfRootsLessThanOrEqualTo#1{%
    \ifnum\PolSturmNbOfIsolatedZeros{#1}=\z@
      \expandafter\POL@nbwmofroots@noroots
    \else
      \expandafter\PolNbWithMultOfRootsLessThanOrEqualTo@%
    \fi {#1}%
}%
\def\POL@nbwmofroots@noroots#1#2{\relax}%
\def\PolNbWithMultOfRootsLessThanOrEqualTo@ #1#2%
{%
    \expandafter\POL@nbwmofrootsleq@prep\romannumeral`&&@#2!{#1}%
}%
\def\POL@nbwmofrootsleq@prep#1!#2%
{%
    \expandafter\POL@nbwmofrootsleq@iloop\expandafter 1\expandafter !%
    \romannumeral0\xintsgn{\POL@eval{#2_0}{#1}}!%
    #1!{#2}%
}%
\def\POL@nbwmofrootsleq@iloop#1!#2!#3!#4%
{% #1 = index, #2 = sign of evaluation at value, #3 = value, #4 = sturmname
    \xintifCmp{#3}{\POL@xintexprGetVar{#4L_#1}}%
      {\POL@nbwmofrootsleq@return !}%
      {\POL@nbwmofrootsleq@return
       \PolSturmIfZeroExactlyKnown{#4}{#1}%
        {+\PolSturmIsolatedZeroMultiplicity{#4}{#1}}{}!%
      }%
      % in third branch we are sure that if root is exactly known
      % the test \xintifLt will be negative
      {\xintifLt{#3}{\POL@xintexprGetVar{#4R_#1}}%
         {\POL@nbwmofrootsleq@return
            \unless
            \ifnum#2=\xintSgn{\POL@eval{#4_0}{\POL@xintexprGetVar{#4L_#1}}}
            +\PolSturmIsolatedZeroMultiplicity{#4}{#1}\fi !%
         }%
         {+\PolSturmIsolatedZeroMultiplicity{#4}{#1}%
          \ifnum#1=\PolSturmNbOfIsolatedZeros{#4}
             \expandafter\POL@nbwmofrootsleq@return\expandafter !%
          \fi
          \expandafter\POL@nbwmofrootsleq@iloop \the\numexpr\@ne+%
         }%
       }%
    #1!#2!#3!{#4}%
}%
\def\POL@nbwmofrootsleq@return #1!#2!#3!#4!#5{#1\relax}%
\endinput
